Temperature Sensor
Swema 05
Ball temperature sensor
Temperature sensor with high frequency USB output for measuring black globe temperature.
Swema 05 meets the requirements of ISO 7726 for use for ISO 7730 - Ergonomics of the thermal environment. Swema 05 can be used for any other multi-probe setup with the SwemaMultipoint for PC or with SwemaTerminal 3 for single probe setup. The number of values read is maximum 100 per second - more probes connected - fewer values per probe.
The SwemaMultipoint software can read values from Swema 05 up to 10 times per second.
- Temperature 0...50 °C
- Sampling frequency: Max. 100 Hz
SWA 14
Air temperature sensor
Fast Pt-100 air temperature sensor for air.
Perfect for accurate and fast room temperature measurements. Can be connected to any Swema 3000.
- For Swema 3000 /md / mdH
SWA 32
wind knife
The SWA 32 probe fits every Swema 3000 with firmware 5.
- Air speed
- Airflow
- temperature
SWA50
Cable temperature sensor
Temperature sensor: cable sensor.
For liquids, powders and air.
- For Swema 3000 /md / mdH
SWA51
Tap water, oven temperature sensor
Temperature sensor for oven and tap water.
Perfect in apartment buildings to check the temperature.
- For Swema 3000 /md / mdH
Globe SWA 52
Globe temperature sensor
Temperature sensor for measuring the black globe temperature.
- For Swema 3000 /md / mdH
SWB 54
Insert 300 mm temperature sensor
Temperature sensor, stainless steel, with small diameter for high temperatures.
- For Swema 3000 /md / mdH
SWB 55
Insert 150 mm temperature sensor
Temperature sensor for liquids, powder, air and more, for temperatures up to 350 degrees C.
Shorter (handier) than SWA 54.
- For Swema 3000 /md / mdH
SWT316
Cylinder temperature sensor
The surface temperature of drying cylinders in a paper machine is measured with SWT 316.
- For Swema 3000 /md / mdH
- For SwemaTemp 21/22
T14
Air temperature sensor
Fast Pt-100 temperature sensor that is connected to SwemaTemp 20 for air temperature measurement.
- For SwemaTemp 21/22
T50
Cable temperature sensor
T50 is a Pt-100 cable sensor that is connected to SwemaTemp 20.
- For SwemaTemp 21/22
T50 5m
Cable temperature sensor
T50 is a Pt-100 cable sensor that is connected to SwemaTemp 20.
- For SwemaTemp 21/22
T51
Tap water, oven temperature sensor
T51 is a Pt-100 sensor that can be connected to SwemaTemp 20 for measurement in oven and tap water.
- For SwemaTemp 21/22
T52
Black Globe Temperature Sensor
T52 is a Pt-100 black globe sensor that is connected to SwemaTemp 20 to measure the black globe temperature.
- For SwemaTemp 21/22
T54
Insert 300 mm temperature sensor
T54 is a Pt-100 incision temperature sensor for connection to SwemaTemp 20, stainless steel with small diameter for high temperatures.
- For SwemaTemp 21/22
T55
Plug-in 150 mm temperature sensor
T55 is a Pt-100 plug-in temperature sensor for connection to SwemaTemp 21, stainless steel with small diameter for high temperatures.
- For SwemaTemp 21/22
Wire probe type K
Wire probe type K
Air/liquid/surface temperature sensor connected to the thermocouple input of the Swema 3000md/mdH /SwemaMan 8 instruments.
Pt100 foil element
Belt temperature sensor
Foil elements are used for highly accurate surface and air temperature measurements.
Due to the low heat capacity of the sensor (large surface, low mass), the temperature of the measured object is hardly affected and the response time is fast. Foil elements also ensure a fast response time.
- Temperature -200... 200°C
- Small mass
- Quick response
- Without plug
Mica element Pt100
Mica Temperature Sensor
Mica elements are used for highly accurate surface and air temperature measurements.
Due to the low heat capacity of the sensor (large surface, low mass), the temperature of the measured object is hardly affected and the response time is fast. Mica elements also ensure a fast response time. The element is insulated with adhesive tape.
- Temperature -200... 200°C
- Tested according to MIL-STD 810 G.
- Small mass
- Quick response
- Without plug
